Lift & Leveling Kit Installation Near Murray, UT
Leveling kit and suspension lift installation for trucks and SUVs, with alignment included. Our shop is 4 miles from Murray — about 8 min. We diagnose every issue before recommending any repair.
Lift & Leveling Kit Installation Near Murray
Getting here: Head north on State Street from Murray into South Salt Lake. Turn left on Crystal Ave — we're about half a mile west of State Street on the right. About 8 minutes. TRAX Blue Line riders can board at Murray Central and ride to Central Pointe station, then walk 3 minutes east to our shop.
Murray Central TRAX Station makes the drop-off easy. Board the Red Line at Murray Central, ride north to Central Pointe Station, and walk 3 minutes east to our shop. Drop your car before work, take TRAX to your day, and we'll call when the job is done. Uber and Lyft are also available from our lot throughout the day — the return ride to Murray Central is about 8 minutes.
I-215 Southbound On-Ramp — 4500 South
4 min south of shopThe main Murray freeway access point toward the Cottonwood Canyons. This sweeping on-ramp at highway speed is where lift stability matters — a quality leveling kit with upgraded struts handles it cleanly.
Fashion Place Mall — 6191 S State Street
4 miles south on State StA clear landmark on the State Street route from Murray toward our shop. From Fashion Place heading north, it's a straight 3.5-mile drive to Crystal Ave — where our shop is half a mile west.
Murray Park — 296 E 5300 South
3 min south of shopA recognizable Murray landmark and the Jordan River Parkway trailhead. Head north from Murray Park on State Street and Crystal Ave is about 2.5 miles ahead on the left.
What Is Lift & Leveling Kit Installation?
A leveling kit corrects the factory front-to-rear height difference on trucks and SUVs using spacers or strut extensions — raising the front to match the rear without significantly changing ride quality. A suspension lift raises the entire vehicle by replacing or augmenting springs, shocks, and sometimes control arms, adding clearance for larger tires and off-road use. Both require a wheel alignment after installation to maintain proper handling, tire wear, and steering geometry.
Why Murray Drivers Need Lift & Leveling Kit Installation Specialists
Murray's easy I-215 access is a double-edged lift-kit consideration: the sweeping on-ramps at 45+ mph require a lift that doesn't add body roll or degrade high-speed stability, while the canyon destinations those ramps lead to require actual clearance and capable all-terrain tires. Many Murray truck owners are daily commuters who also want to get into the canyons on a Saturday morning — a 2-inch leveling kit with a quality shock upgrade and 285/70s satisfies both conditions without the harshness of a tall spacer lift on freeway drives.
That's why Murray drivers bring their lift & leveling kits work to us. We diagnose the cause before recommending anything — you'll know exactly what needs to happen before any work begins.
Local tip: For trucks that split time between I-215 highway commuting and Cottonwood Canyon trail access, upgrade the front struts when you level — a quality strut handles both the freeway sweeper ramps and the rocky canyon approach roads better than the stock unit under added preload.
How We Handle Lift & Leveling Kit Installation for Murray Customers
Most Murray customers drop off in the morning and pick up the same day — call ahead and we'll confirm timing for your specific job.
Tell Us What You're After
Let us know your vehicle, lift height or leveling goal, whether you're running new tires, and how you use the truck — off-road, daily driver, or towing.
Suspension Assessment
We inspect ball joints, tie rod ends, CV boots, and shocks before installing anything. Putting a new kit on worn components creates handling problems.
Parts & Fitment Confirmation
We verify the kit fits your exact year and configuration before starting. Some trucks have mid-year changes that affect fitment.
Installation
The kit goes in correctly — torqued to spec, hardware inspected, no shortcuts. Most leveling kits take 2–3 hours; suspension lifts take 4–8 hours depending on complexity.
Alignment & Road Test
Every lift gets an alignment. We verify steering, handling, and ride feel before the truck goes home.
Common Lift & Leveling Kit Installation Problems We See from Murray
We diagnose before we recommend — Murray customers know exactly what's wrong and why before any work begins.
Uneven Stance (Factory Rake)
Most trucks leave the factory nose-down to account for payload sag. A leveling kit brings the front up to match the rear for a level stance and cleaner appearance.
Insufficient Tire Clearance
Running larger off-road tires requires additional lift to prevent rubbing on body panels and suspension components during full travel.
Limited Off-Road Ground Clearance
Factory ride height limits approach, departure, and breakover angles. A suspension lift adds the clearance needed for trails, rocky terrain, and off-pavement driving.
Post-Lift Alignment Problems
Many trucks installed elsewhere come in with uneven tire wear, pulling, or steering wander from lifts that were never properly aligned after installation.
Why Murray Drivers Choose Scott's for Lift & Leveling Kit Installation
Murray is 4 miles from our shop. Drivers come this far because these are the things that matter — and they can't find them closer to home.
8 Minutes from Murray + TRAX
State Street north to Crystal Ave — or drop off and take TRAX one stop from Murray Central. Most jobs are done same day.
We Know State Street Driving
Murray's State Street is one of the most signal-dense corridors in the valley. We see the wear patterns that come from daily stop-and-go commuting and know exactly what to check first.
Diagnosis Before We Recommend Anything
We check the whole system before pointing to any specific part. You know exactly what we found and why before any work begins.
In Business Since 1990
Murray drivers come here when a closer shop hasn't fixed the problem. We've been doing this since 1990 and get it right the first time.
Lift & Leveling Kit Installation — What Murray Customers Get
Every lift & leveling kits job for Murray customers starts with diagnosis. We find the root cause before recommending anything — and only do the work your vehicle actually needs.
More Auto Repair Services Near Murray
We handle the full range of mechanical repairs for Murray drivers — same shop, same mechanic, same honest diagnosis.
Lift & Leveling Kit Installation Near Other Salt Lake Valley Cities
We serve all of the Salt Lake Valley from our South Salt Lake shop — one location, every city.
5-Star Reviews
What Our Customers Say
Real reviews from Google — 5 stars across the board
“My wife's Subaru was having a timing issue with the wipers. I brought it to Scott's and they diagnosed the problem quickly and torqued a bolt in about 5 seconds that fixed it. They didn't charge us and we will definitely be coming back here for auto service with Subarus.”
“When my previous mechanic told me my car could not be fixed I was desperate and about to get rid of it. But before I gave up I wanted to try one last mechanic. Then I found Scott — brought the car to him and he fixed it quickly like nothing. I couldn't believe it, my car was just running fine. Scott is a genius, he resurrected my dead car!”
Frequently Asked Questions — Lift & Leveling Kit Installation Near Murray
Do I need an alignment after a leveling kit?
Yes, always. Even a small spacer leveling kit changes the front caster and camber angles. Driving without an alignment after installation causes uneven tire wear and affects steering feel. We include alignment with every lift and leveling kit installation.
What's the difference between a leveling kit and a lift kit?
A leveling kit raises only the front of the truck to match the rear — correcting the factory nose-down rake. It typically adds 1–2.5 inches using strut spacers or extended strut toppers. A lift kit raises the entire vehicle by modifying or replacing suspension components, adding 2–6+ inches of total height for ground clearance and larger tire fitment.
Will a leveling kit affect my ride quality?
A quality spacer leveling kit on a truck in good suspension condition typically causes minimal change. Some stiffer spacers make the ride slightly firmer. If your shocks are already worn, adding a leveling kit makes that more noticeable — which is why we inspect the suspension before installing.
How big of a lift do I need for a specific tire size?
It depends on the truck and tire size. As a general guide, most half-ton trucks need at least a 2" leveling kit to fit 33" tires without rubbing, and a 3–4" suspension lift for 35" tires. We confirm fitment for your specific vehicle and tire combination before starting any work.
Can I supply my own kit, or do you source them?
Either works. If you've already purchased a kit, bring it and we'll install it. If you'd like us to source parts, tell us your vehicle and lift goals and we'll quote options.
How long does installation take?
A leveling kit installation typically takes 2–3 hours. A suspension lift kit takes 4–8 hours depending on kit complexity and your truck's configuration. We give you a realistic timeline when we quote the work.
Is there a warranty on the repair?
Yes. Every repair we perform is backed by a 2-year parts and labor warranty. If something we installed gives you trouble within two years, bring it back and we make it right at no charge.
How does your pricing compare to dealers and chain shops?
Our labor rates are consistently below dealer rates — typically 20–40% less for the same installation. We use quality hardware and back every job with a 2-year parts and labor warranty. You get a written estimate before any work starts so there are no surprises.
Ready for Quality Auto Repair?
Contact Scott's Auto & Clutch Repair today for honest service and expert repairs.
- Free Estimates
- Competitive Pricing
- Same or Next Day Service
- 2-Year Parts & Labor Warranty
- Free Towing on Repairs Over $1,000
144 W Crystal Ave, South Salt Lake, UT 84115