CV Joint & Axle Repair Near Murray, UT
CV joint replacement, CV axle repair, and CV boot service. Our shop is 4 miles from Murray — about 8 min. We diagnose every issue before recommending any repair.
CV Joint & Axle Repair Near Murray
Getting here: Head north on State Street from Murray into South Salt Lake. Turn left on Crystal Ave — we're about half a mile west of State Street on the right. About 8 minutes. TRAX Blue Line riders can board at Murray Central and ride to Central Pointe station, then walk 3 minutes east to our shop.
Murray Central TRAX Station makes the drop-off easy. Board the Red Line at Murray Central, ride north to Central Pointe Station, and walk 3 minutes east to our shop. Drop your car before work, take TRAX to your day, and we'll call when the job is done. Uber and Lyft are also available from our lot throughout the day — the return ride to Murray Central is about 8 minutes.
Murray Central TRAX Station
4 miles southThe most practical transit option for Murray customers. Board the Red Line here and ride one stop north to Central Pointe — a 3-minute walk from our shop. Drop your car, ride TRAX to your day, pick up when we call.
Fashion Place Mall — 6191 S State Street
4 miles south on State StA clear landmark on the State Street route to our shop. From Fashion Place heading north on State Street, it's a straight 3.5-mile drive to Crystal Ave — no turns until you reach our street.
2700 South & State Street
0.2 miles from shopWhen you see the 2700 South intersection on State Street, Crystal Ave is 2 blocks north on the left. We're at 144 W Crystal Ave, about half a mile west of State Street on the right side.
What Is CV Joint & Axle Repair?
A CV axle is the shaft that sends power from your engine to your wheels, and it has flexible joints at each end so it can move with your steering and suspension. When one of those joints wears out, you usually hear a clicking sound when you turn. Catching it early — often just a torn rubber boot — can save you from a full axle replacement. Visit our service page to see what we inspect.
Why Murray Drivers Need CV Joint & Axle Repair Specialists
Murray's State Street makes left turns across 4–6 lanes of traffic a daily occurrence. Wide-angle turns at higher-speed intersections like State and 5300 South place peak angular load on outer CV joints. Fashion Place Mall's parking lot subjects CV joints to constant tight-radius maneuvering with the weight of a full vehicle. Murray TRAX commuters who avoid some of this mileage may find their CV boots age from UV and ozone before the joints wear from use.
That's why Murray drivers bring their cv joint repair work to us. We diagnose the cause before recommending anything — you'll know exactly what needs to happen before any work begins.
Local tip: Grease on the inside of your front wheel — a dark smear on the inner wheel face — is the sign of a torn CV boot. Cleaning it off and watching for recurrence pinpoints which side needs attention.
How We Handle CV Joint & Axle Repair for Murray Customers
Most Murray customers drop off in the morning and pick up the same day — call ahead and we'll confirm timing for your specific job.
Describe Symptoms
Tell us about clicking when turning, vibration, or grease you've noticed on the inside of your wheel.
Inspection
We inspect the CV boots, joints, and axles to find the exact source of the problem.
Detailed Quote
Clear estimate before any work begins.
Repair
We repair or replace the worn CV components based on what the diagnosis shows.
Road Test
We verify the repair with a thorough road test.
Common CV Joint & Axle Repair Problems We See from Murray
We diagnose before we recommend — Murray customers know exactly what's wrong and why before any work begins.
Clicking When Turning
A clicking or popping noise during turns is the classic sign of a worn outer CV joint.
See symptom details →Vibration When Accelerating
A damaged CV joint can cause vibration that builds with speed.
See symptom details →Grease on Inner Wheel
A torn CV boot leaks grease, which you may notice as a dark residue on the inside of your wheel or tire.
Clunking Sound
A clunk when shifting from drive to reverse can indicate worn CV joints or axle play.
Why Murray Drivers Choose Scott's for CV Joint & Axle Repair
Murray is 4 miles from our shop. Drivers come this far because these are the things that matter — and they can't find them closer to home.
8 Minutes from Murray + TRAX
State Street north to Crystal Ave — or drop off and take TRAX one stop from Murray Central. Most jobs are done same day.
We Know State Street Driving
Murray's State Street is one of the most signal-dense corridors in the valley. We see the wear patterns that come from daily stop-and-go commuting and know exactly what to check first.
Diagnosis Before We Recommend Anything
We check the whole system before pointing to any specific part. You know exactly what we found and why before any work begins.
In Business Since 1990
Murray drivers come here when a closer shop hasn't fixed the problem. We've been doing this since 1990 and get it right the first time.
CV Joint & Axle Repair — What Murray Customers Get
Every cv joint repair job for Murray customers starts with diagnosis. We find the root cause before recommending anything — and only do the work your vehicle actually needs.
More Auto Repair Services Near Murray
We handle the full range of mechanical repairs for Murray drivers — same shop, same mechanic, same honest diagnosis.
CV Joint & Axle Repair Near Other Salt Lake Valley Cities
We serve all of the Salt Lake Valley from our South Salt Lake shop — one location, every city.
5-Star Reviews
What Our Customers Say
Real reviews from Google — 5 stars across the board
“Scott has always preferred good work on my vehicles. I had his shop replace the driveline on my 2014 VW Touareg — not an easy job. The cost was cheaper than another shop. They did a great job. I had them rebuild the alternator because it was too cold for me to do it. The cost was better than I thought. I am very pleased with their work. Scott has always given me good solid advice.”
“Honest and smart mechanic. Scott will explain what needs to be done. He replaced my water pump and my car is working perfectly! This was after taking it to 2 shops previous to Scott's. He will be my first option from now on. Saved me a ton of money, was honest in his assessment, and fast! 100% recommend!”
“Scott is the best! Finishes the job quickly, prices are competitive, and he has great customer service. I've had nothing but good experiences here. Thanks for the rebuilt engine and install. I will be back for future needs!”
Frequently Asked Questions — CV Joint & Axle Repair Near Murray
What causes CV joint failure?
Most commonly, the CV boot tears and lets grease out and road grit in, causing the joint to wear out. Regular inspections catch torn boots before the joint is damaged.
Can I drive with a bad CV joint?
A worn CV joint can fail completely, leaving you stranded. It's best to get it repaired promptly once you notice clicking or vibration.
How long does CV joint repair take?
Most CV axle repairs are completed in 1–3 hours depending on the vehicle.
Should I get a rebuilt axle or a CV joint kit?
It depends on how far the damage has progressed. If the boot is torn but the joint is still serviceable, a boot kit works. If the joint has worn from running without grease, a full axle replacement is the reliable option. We inspect and tell you which applies before recommending anything.
Do you check the opposite axle at the same time?
Yes. Both axles are the same age and see the same road conditions. If one boot is torn or one joint is worn, we inspect the other side closely. Catching a developing problem on the opposite axle prevents a second repair visit a few months later.
What about the axle seal at the transmission?
We check it whenever an axle is out. A seeping axle seal lets transmission fluid contaminate the CV grease and shorten the new axle's life. If it needs replacement, we quote it alongside the axle job since the labor is already there.
Is there a warranty on the repair?
Yes. Every repair we perform is backed by a 2-year parts and labor warranty. If something we fixed gives you trouble within two years, bring it back and we make it right at no charge.
How does your pricing compare to dealers and chain shops?
Our labor rates and parts pricing are consistently below dealer rates — typically 20–40% less for the same repair. We use quality parts and back every job with a 2-year parts and labor warranty. You get a written estimate before any work starts so there are no surprises.
Ready for Quality Auto Repair?
Contact Scott's Auto & Clutch Repair today for honest service and expert repairs.
- Free Estimates
- Competitive Pricing
- Same or Next Day Service
- 2-Year Parts & Labor Warranty
- Free Towing on Repairs Over $1,000
144 W Crystal Ave, South Salt Lake, UT 84115