CV Joint & Axle Repair Near Kearns, UT
CV joint replacement, CV axle repair, and CV boot service. Our shop is 7 miles from Kearns — about 12 min. We diagnose every issue before recommending any repair.
CV Joint & Axle Repair Near Kearns
Getting here: Take 5400 South east from Kearns to State Street. Turn left (north) on State Street and head about 1.5 miles into South Salt Lake. Turn left on Crystal Ave — we're half a mile west of State Street on the right side. About 12 minutes from central Kearns.
Kearns customers are about 12 minutes from the shop via 5400 South. Drop your car in the morning and Uber or Lyft back — the return ride to Kearns is typically under 15 minutes. TRAX isn't on this direct route, but rideshare is available from our lot throughout the day. Call ahead and we'll have the intake ready when you arrive.
Utah Olympic Oval — 5662 Cougar Lane
2 miles east of central KearnsA well-known Kearns landmark near the 5400 South route east. From the Oval, continue east on 5400 South to State Street — our shop is 1.5 miles north on State Street, then left on Crystal Ave.
5400 South & State Street
3 min from shopThe main junction coming east from Kearns. Turn north on State Street from 5400 South and continue 1.5 miles — Crystal Ave is on the left. We're halfway down the block at 144 W Crystal Ave.
2700 South & State Street
2 blocks from shopIf you take the freeway route (4700 South east to I-15 north), exit at 2700 South and head east to State Street — Crystal Ave is 2 blocks south on State Street, then turn right. We're at 144 W Crystal Ave.
What Is CV Joint & Axle Repair?
A CV axle is the shaft that sends power from your engine to your wheels, and it has flexible joints at each end so it can move with your steering and suspension. When one of those joints wears out, you usually hear a clicking sound when you turn. Catching it early — often just a torn rubber boot — can save you from a full axle replacement. Visit our service page to see what we inspect.
Why Kearns Drivers Need CV Joint & Axle Repair Specialists
Kearns' flat terrain generates primarily mileage-driven CV joint wear rather than terrain-driven wear. Daily I-15 commutes at highway speed accumulate CV cycles that wear inner joints differently than tight city turns wear outer joints. Commercial and work vehicles common to the Kearns area often reach CV joint wear thresholds earlier due to higher daily loads on top of commute mileage.
That's why Kearns drivers bring their cv joint repair work to us. We diagnose the cause before recommending anything — you'll know exactly what needs to happen before any work begins.
Local tip: Inner CV joint failure is less obvious than outer — it often shows as vibration during acceleration rather than clicking during turns. If your car shudders under hard acceleration but feels fine cruising, the inner CV joint deserves inspection.
How We Handle CV Joint & Axle Repair for Kearns Customers
Kearns customers are about 12 minutes away — drop off in the morning and most jobs are done by afternoon.
Describe Symptoms
Tell us about clicking when turning, vibration, or grease you've noticed on the inside of your wheel.
Inspection
We inspect the CV boots, joints, and axles to find the exact source of the problem.
Detailed Quote
Clear estimate before any work begins.
Repair
We repair or replace the worn CV components based on what the diagnosis shows.
Road Test
We verify the repair with a thorough road test.
Common CV Joint & Axle Repair Problems We See from Kearns
We diagnose before we recommend — Kearns customers know exactly what's wrong and why before any work begins.
Clicking When Turning
A clicking or popping noise during turns is the classic sign of a worn outer CV joint.
See symptom details →Vibration When Accelerating
A damaged CV joint can cause vibration that builds with speed.
See symptom details →Grease on Inner Wheel
A torn CV boot leaks grease, which you may notice as a dark residue on the inside of your wheel or tire.
Clunking Sound
A clunk when shifting from drive to reverse can indicate worn CV joints or axle play.
Why Kearns Drivers Choose Scott's for CV Joint & Axle Repair
Kearns is 7 miles from our shop. Drivers come this far because these are the things that matter — and they can't find them closer to home.
12 Minutes on 5400 South
5400 South east to State Street — straightforward drive with no freeway required. Drop off in the morning and most jobs are done the same day.
We Know Daily-Driver Wear
Kearns drivers use their cars hard every day — short ramps, residential stop-and-go, and work commutes all add up. We see this kind of daily-use wear from Kearns vehicles regularly.
Diagnosis Before We Recommend Anything
We check the whole system before pointing to any specific part. You know exactly what we found and why before any work begins.
In Business Since 1990
Kearns drivers come here when they want the diagnosis done right and the repair to stick. We've been doing this since 1990 and fix it the first time.
CV Joint & Axle Repair — What Kearns Customers Get
Every cv joint repair job for Kearns customers starts with diagnosis. We find the root cause before recommending anything — and only do the work your vehicle actually needs.
More Auto Repair Services Near Kearns
We handle the full range of mechanical repairs for Kearns drivers — same shop, same mechanic, same honest diagnosis.
CV Joint & Axle Repair Near Other Salt Lake Valley Cities
We serve all of the Salt Lake Valley from our South Salt Lake shop — one location, every city.
5-Star Reviews
What Our Customers Say
Real reviews from Google — 5 stars across the board
“Skilled, friendly, and cost-efficient. Will definitely bring other vehicles back.”
“Great service and great prices!”
“Great shop! Knowledgeable staff. Fast service! They always make time for the unexpected repairs that need to be fixed quickly.”
Frequently Asked Questions — CV Joint & Axle Repair Near Kearns
What causes CV joint failure?
Most commonly, the CV boot tears and lets grease out and road grit in, causing the joint to wear out. Regular inspections catch torn boots before the joint is damaged.
Can I drive with a bad CV joint?
A worn CV joint can fail completely, leaving you stranded. It's best to get it repaired promptly once you notice clicking or vibration.
How long does CV joint repair take?
Most CV axle repairs are completed in 1–3 hours depending on the vehicle.
Should I get a rebuilt axle or a CV joint kit?
It depends on how far the damage has progressed. If the boot is torn but the joint is still serviceable, a boot kit works. If the joint has worn from running without grease, a full axle replacement is the reliable option. We inspect and tell you which applies before recommending anything.
Do you check the opposite axle at the same time?
Yes. Both axles are the same age and see the same road conditions. If one boot is torn or one joint is worn, we inspect the other side closely. Catching a developing problem on the opposite axle prevents a second repair visit a few months later.
What about the axle seal at the transmission?
We check it whenever an axle is out. A seeping axle seal lets transmission fluid contaminate the CV grease and shorten the new axle's life. If it needs replacement, we quote it alongside the axle job since the labor is already there.
Is there a warranty on the repair?
Yes. Every repair we perform is backed by a 2-year parts and labor warranty. If something we fixed gives you trouble within two years, bring it back and we make it right at no charge.
How does your pricing compare to dealers and chain shops?
Our labor rates and parts pricing are consistently below dealer rates — typically 20–40% less for the same repair. We use quality parts and back every job with a 2-year parts and labor warranty. You get a written estimate before any work starts so there are no surprises.
Ready for Quality Auto Repair?
Contact Scott's Auto & Clutch Repair today for honest service and expert repairs.
- Free Estimates
- Competitive Pricing
- Same or Next Day Service
- 2-Year Parts & Labor Warranty
- Free Towing on Repairs Over $1,000
144 W Crystal Ave, South Salt Lake, UT 84115