Welding Services Near Midvale, UT

Automotive welding for exhaust, frame, and suspension repairs. Our shop is 5 miles from Midvale — about 8 min. We diagnose every issue before recommending any repair.

Welding Services Near Midvale

Getting here: Head north on State Street from Midvale — it's a straight 5-mile shot into South Salt Lake with no turns required until you reach Crystal Ave on your left. Turn left and our shop is on the right. About 8 minutes in light traffic. TRAX Blue Line riders can board at Midvale Center and ride to Central Pointe station — a 3-minute walk to our door.

Midvale customers can take the TRAX Blue Line — board at Midvale Center and ride north to Central Pointe Station, then walk 3 minutes east to our shop at 144 W Crystal Ave. Drop your car in the morning, ride TRAX to work or wherever you need to be, and we'll call when the job is done. Uber and Lyft are also available from our lot throughout the day for the return trip to Midvale.

Hours Mon-Fri: 8:00 AM - 5:30 PM
From Midvale 5 miles — about 8 min drive
In Business Since 1990 — 36+ years serving the Salt Lake Valley

Midvale Center TRAX Station — 7200 S State Street

5 miles south of shop

The most convenient Blue Line stop for Midvale transit customers. Board here heading north and ride to Central Pointe Station — a 3-minute walk from our shop at 144 W Crystal Ave. Drop your car, ride TRAX, pick up same day.

7200 South & State Street

4 miles south of shop

The main Midvale commercial intersection on State Street. From here, head straight north on State Street for 4 miles with no turns — Crystal Ave is on your left just past the 2700 South light. We're halfway down the block.

Central Pointe TRAX Station — 900 W / 2100 S

0.3 miles from shop

The arrival station for Midvale TRAX customers. Walk 3 minutes east on 2100 South, then turn right on Crystal Ave — we're at 144 W Crystal Ave on the right. Midvale is the closest community to this station via State Street.

What Is Welding Services?

Most auto shops don't have welding equipment, so they replace entire sections when only a small area is cracked or broken. We weld in-house, which means we can often repair your exhaust, a broken bracket, or a cracked frame section at a fraction of the cost of full replacement. We also build custom parts when nothing off-the-shelf fits. See our service page for the types of work we handle.

Why Midvale Drivers Need Welding Services Specialists

Midvale's I-15 proximity and State Street commercial character mean undercarriage damage from road debris and pavement impacts is common. The 7200 South commercial zone has loading dock areas where debris from commercial vehicles creates road hazards. Midvale also has older vehicles whose original exhaust welds from the factory have reached their fatigue limit — small cracks at original weld seams that need reinforcing before they become leaks.

That's why Midvale drivers bring their welding services work to us. We diagnose the cause before recommending anything — you'll know exactly what needs to happen before any work begins.

Local tip: Original factory exhaust welds on high-mileage Midvale vehicles sometimes develop micro-cracks that aren't audible until they grow. If your mechanic mentions the exhaust looks "stressed" at the factory weld points, a preventive reinforcement weld is far cheaper than an emergency repair.

How We Handle Welding Services for Midvale Customers

Midvale customers are 8 minutes away — the closest TRAX-accessible shop in the valley. Most jobs are done same day.

1

Describe the Issue

Tell us what needs attention—exhaust, frame, a broken bracket, or custom work.

2

Inspection

We assess whether welding repair is the right approach and what it will involve.

3

Quote

Clear estimate for the welding work before we begin.

4

Welding

Expert welding repair or fabrication performed in our shop.

5

Verification

We verify the repair is solid and safe before returning your vehicle.

Common Welding Services Problems We See from Midvale

We diagnose before we recommend — Midvale customers know exactly what's wrong and why before any work begins.

Exhaust Leaks & Cracks

Cracked exhaust pipes and manifold flanges can often be welded rather than replaced.

Broken Brackets

Exhaust hangers, suspension brackets, and engine mounts can break from road stress and vibration.

Frame Damage

Minor frame damage from impacts or rust can sometimes be repaired with precision welding.

Why Midvale Drivers Choose Scott's for Welding Services

Midvale is 5 miles from our shop. Drivers come this far because these are the things that matter — and they can't find them closer to home.

8 Minutes or One TRAX Stop

State Street north — or board the Blue Line at Midvale Center and ride to Central Pointe, a 3-minute walk from our door.

We Know I-15 Interchange Driving

Midvale's I-15/I-215 interchange is one of the tightest in the valley — hard accelerations and abrupt stops create wear patterns we see from Midvale vehicles regularly.

Diagnosis Before We Recommend Anything

We check the whole system before pointing to any specific part. You know exactly what we found and why before any work begins.

In Business Since 1990

Midvale drivers come here because we're close and because we get the diagnosis right. We've been doing this since 1990 and fix it the first time.

Welding Services — What Midvale Customers Get

Every welding services job for Midvale customers starts with diagnosis. We find the root cause before recommending anything — and only do the work your vehicle actually needs.

Exhaust Welding Frame Welding Suspension Welding Custom Fabrication Bracket Repair

What Our Customers Say

Real reviews from Google — 5 stars across the board

★★★★★

“My wife's Subaru was having a timing issue with the wipers. I brought it to Scott's and they diagnosed the problem quickly and torqued a bolt in about 5 seconds that fixed it. They didn't charge us and we will definitely be coming back here for auto service with Subarus.”

M
Mitch Potter Google Review
★★★★★

“This is my mechanic — he is great.”

D
Debbie White Google Review

Frequently Asked Questions — Welding Services Near Midvale

What types of automotive welding do you do?

We weld exhaust systems (pipes, manifold flanges, custom sections), broken brackets and hangers, minor frame repairs where structurally appropriate, and custom fabrication for non-standard situations.

Is welded exhaust as good as a replacement section?

A clean weld repair with proper penetration and a sound surrounding section is structurally equivalent to a new section. The weld itself is typically stronger than the surrounding base metal when done correctly.

Can you weld a cracked exhaust manifold?

Sometimes, depending on where the crack is and the condition of the surrounding material. Some manifold cracks are good weld candidates; others are better addressed with a replacement manifold. We assess before recommending.

When does exhaust welding make more sense than replacement?

When only a specific section has failed and the surrounding pipe is still structurally sound, a weld repair costs significantly less than full section replacement. For older vehicles and imports where replacement sections aren't stocked locally, welding is often the faster and more practical option too.

What frame damage can you weld, and what can't you fix?

Minor frame damage from low-speed impacts or localized corrosion can sometimes be addressed with precision welding when the base metal is still sound. A section corroded through its wall thickness or with compromised structural integrity is not a weld candidate. We won't weld a structural component we can't repair safely, and we'll tell you clearly when that's the case.

Can you fabricate custom exhaust or bracket parts?

Yes. We can fabricate replacement exhaust sections from stock pipe material, build custom hanger brackets, fabricate heat shields, and create mounting solutions for non-standard situations. This is typically fast and less expensive than waiting for a special-order part.

Is there a warranty on the repair?

Yes. Every repair we perform is backed by a 2-year parts and labor warranty. If something we fixed gives you trouble within two years, bring it back and we make it right at no charge.

How does your pricing compare to dealers and chain shops?

Our labor rates and parts pricing are consistently below dealer rates — typically 20–40% less for the same repair. We use quality parts and back every job with a 2-year parts and labor warranty. You get a written estimate before any work starts so there are no surprises.

Ready for Quality Auto Repair?

Contact Scott's Auto & Clutch Repair today for honest service and expert repairs.

  • Free Estimates
  • Competitive Pricing
  • Same or Next Day Service
  • 2-Year Parts & Labor Warranty
  • Free Towing on Repairs Over $1,000

144 W Crystal Ave, South Salt Lake, UT 84115