Welding Services Near Kearns, UT
Automotive welding for exhaust, frame, and suspension repairs. Our shop is 7 miles from Kearns — about 12 min. We diagnose every issue before recommending any repair.
Welding Services Near Kearns
Getting here: Take 5400 South east from Kearns to State Street. Turn left (north) on State Street and head about 1.5 miles into South Salt Lake. Turn left on Crystal Ave — we're half a mile west of State Street on the right side. About 12 minutes from central Kearns.
Kearns customers are about 12 minutes from the shop via 5400 South. Drop your car in the morning and Uber or Lyft back — the return ride to Kearns is typically under 15 minutes. TRAX isn't on this direct route, but rideshare is available from our lot throughout the day. Call ahead and we'll have the intake ready when you arrive.
Utah Olympic Oval — 5662 Cougar Lane
2 miles east of central KearnsA well-known Kearns landmark near the 5400 South route east. From the Oval, continue east on 5400 South to State Street — our shop is 1.5 miles north on State Street, then left on Crystal Ave.
5400 South & State Street
3 min from shopThe main junction coming east from Kearns. Turn north on State Street from 5400 South and continue 1.5 miles — Crystal Ave is on the left. We're halfway down the block at 144 W Crystal Ave.
2700 South & State Street
2 blocks from shopIf you take the freeway route (4700 South east to I-15 north), exit at 2700 South and head east to State Street — Crystal Ave is 2 blocks south on State Street, then turn right. We're at 144 W Crystal Ave.
What Is Welding Services?
Most auto shops don't have welding equipment, so they replace entire sections when only a small area is cracked or broken. We weld in-house, which means we can often repair your exhaust, a broken bracket, or a cracked frame section at a fraction of the cost of full replacement. We also build custom parts when nothing off-the-shelf fits. See our service page for the types of work we handle.
Why Kearns Drivers Need Welding Services Specialists
Kearns' I-15 on-ramp transitions and older surface streets generate consistent undercarriage stress. Commercial and work vehicles common to Kearns also have higher welding service needs than passenger cars from the loads they carry and the rough road sections they cross. Kearns' community values repair over replacement — welding saves money when the component being repaired is structurally sound.
That's why Kearns drivers bring their welding services work to us. We diagnose the cause before recommending anything — you'll know exactly what needs to happen before any work begins.
Local tip: An exhaust pipe section that can be welded costs a fraction of a replacement section when the surrounding hangers and connections are in acceptable condition. In Kearns, where vehicles often need to serve many more years, repair-over-replace welding makes economic sense.
How We Handle Welding Services for Kearns Customers
Kearns customers are about 12 minutes away — drop off in the morning and most jobs are done by afternoon.
Describe the Issue
Tell us what needs attention—exhaust, frame, a broken bracket, or custom work.
Inspection
We assess whether welding repair is the right approach and what it will involve.
Quote
Clear estimate for the welding work before we begin.
Welding
Expert welding repair or fabrication performed in our shop.
Verification
We verify the repair is solid and safe before returning your vehicle.
Common Welding Services Problems We See from Kearns
We diagnose before we recommend — Kearns customers know exactly what's wrong and why before any work begins.
Exhaust Leaks & Cracks
Cracked exhaust pipes and manifold flanges can often be welded rather than replaced.
Broken Brackets
Exhaust hangers, suspension brackets, and engine mounts can break from road stress and vibration.
Frame Damage
Minor frame damage from impacts or rust can sometimes be repaired with precision welding.
Why Kearns Drivers Choose Scott's for Welding Services
Kearns is 7 miles from our shop. Drivers come this far because these are the things that matter — and they can't find them closer to home.
12 Minutes on 5400 South
5400 South east to State Street — straightforward drive with no freeway required. Drop off in the morning and most jobs are done the same day.
We Know Daily-Driver Wear
Kearns drivers use their cars hard every day — short ramps, residential stop-and-go, and work commutes all add up. We see this kind of daily-use wear from Kearns vehicles regularly.
Diagnosis Before We Recommend Anything
We check the whole system before pointing to any specific part. You know exactly what we found and why before any work begins.
In Business Since 1990
Kearns drivers come here when they want the diagnosis done right and the repair to stick. We've been doing this since 1990 and fix it the first time.
Welding Services — What Kearns Customers Get
Every welding services job for Kearns customers starts with diagnosis. We find the root cause before recommending anything — and only do the work your vehicle actually needs.
More Auto Repair Services Near Kearns
We handle the full range of mechanical repairs for Kearns drivers — same shop, same mechanic, same honest diagnosis.
Welding Services Near Other Salt Lake Valley Cities
We serve all of the Salt Lake Valley from our South Salt Lake shop — one location, every city.
5-Star Reviews
What Our Customers Say
Real reviews from Google — 5 stars across the board
“Scott is the best! Finishes the job quickly, prices are competitive, and he has great customer service. I've had nothing but good experiences here. Thanks for the rebuilt engine and install. I will be back for future needs!”
“I have taken my vehicles to many other mechanics before I found this place. They are absolutely the best — they won't give you the run around, they won't expect you to go find a bolt they broke (yes, that happened to me once), they will give you peace of mind. I cannot stress enough how much better Scott's Auto & Clutch Repair is than the competition. Even if you like your mechanic now, give them a try and let them wow you.”
“When my previous mechanic told me my car could not be fixed I was desperate and about to get rid of it. But before I gave up I wanted to try one last mechanic. Then I found Scott — brought the car to him and he fixed it quickly like nothing. I couldn't believe it, my car was just running fine. Scott is a genius, he resurrected my dead car!”
Frequently Asked Questions — Welding Services Near Kearns
What types of automotive welding do you do?
We weld exhaust systems (pipes, manifold flanges, custom sections), broken brackets and hangers, minor frame repairs where structurally appropriate, and custom fabrication for non-standard situations.
Is welded exhaust as good as a replacement section?
A clean weld repair with proper penetration and a sound surrounding section is structurally equivalent to a new section. The weld itself is typically stronger than the surrounding base metal when done correctly.
Can you weld a cracked exhaust manifold?
Sometimes, depending on where the crack is and the condition of the surrounding material. Some manifold cracks are good weld candidates; others are better addressed with a replacement manifold. We assess before recommending.
When does exhaust welding make more sense than replacement?
When only a specific section has failed and the surrounding pipe is still structurally sound, a weld repair costs significantly less than full section replacement. For older vehicles and imports where replacement sections aren't stocked locally, welding is often the faster and more practical option too.
What frame damage can you weld, and what can't you fix?
Minor frame damage from low-speed impacts or localized corrosion can sometimes be addressed with precision welding when the base metal is still sound. A section corroded through its wall thickness or with compromised structural integrity is not a weld candidate. We won't weld a structural component we can't repair safely, and we'll tell you clearly when that's the case.
Can you fabricate custom exhaust or bracket parts?
Yes. We can fabricate replacement exhaust sections from stock pipe material, build custom hanger brackets, fabricate heat shields, and create mounting solutions for non-standard situations. This is typically fast and less expensive than waiting for a special-order part.
Is there a warranty on the repair?
Yes. Every repair we perform is backed by a 2-year parts and labor warranty. If something we fixed gives you trouble within two years, bring it back and we make it right at no charge.
How does your pricing compare to dealers and chain shops?
Our labor rates and parts pricing are consistently below dealer rates — typically 20–40% less for the same repair. We use quality parts and back every job with a 2-year parts and labor warranty. You get a written estimate before any work starts so there are no surprises.
Ready for Quality Auto Repair?
Contact Scott's Auto & Clutch Repair today for honest service and expert repairs.
- Free Estimates
- Competitive Pricing
- Same or Next Day Service
- 2-Year Parts & Labor Warranty
- Free Towing on Repairs Over $1,000
144 W Crystal Ave, South Salt Lake, UT 84115